In our Northern latitudes, a ground-mounted solar array can typically deliver a higher energy output for the same installed capacity when compared to a rooftop solar. That is explained by a choice of an optimal steeper array tilt that a ground-mounted solar array can be installed at. The steep tilt angle of 30-40 degrees helps to generate a higher annual yield and helps modules to clean off the snow faster in winter months. Generation yield of a ground-mounted system can improve by 15-20% for a single-axis solar tracker and by 31% for a dual axis solar tracker system.
A well-designed and installed ground-mounted system has a long economic life, which is not limited by the life of buildings. Unlike rooftop systems, ground-mounted PV is installed once and for the long-term, while rooftop systems may need to be moved and re-installed every time the roof is replaced or repaired.
The economics of a ground-mounted solar improves rapidly as the project size gets larger. The land area required for 1MW of fixed-tilt ground mounted solar with 18% efficient modules, including clearance from fences, ranges from 4 – 6 acres. Good access for interconnection and predictability of the interconnection costs are often the key factors in deciding about the ground-mounted system location and its sizing.
Another very important factor is the suitability of the soil for cost–effective foundation design. At minimum the life of foundations and racking should match the 30+ year life of the solar array.
Finding the right balance between cost of foundations and how well foundations will last in the long-term helps to maximize Return on Equity (ROE) and mitigate the risk of potential future issues. Most of ground-mounted system foundations installed in Western Canada are experiencing a frost-heave force that can eject concrete, or steel piles, or helical piles out of the ground. A proper foundation design that is based on soil samples, load tests and pullout tests determines the required embedment depth. Dandelion Renewables has designed and successfully installed many foundation types across Saskatchewan, Alberta and British Columbia.
There is a trend in the solar industry towards installing more of the steel ground-mount racking. Steel is cheaper than aluminum, however steel is susceptible to rusting and is heavier.
Through our partner, Dandelion Renewables conducts all the testing required to design the optimal foundation. We evaluate frost-heave impact based on the methodology that goes beyond Canadian building code requirements and we do our own due-diligence about racking materials and galvanization used. In the end, ground-mounted solar systems that we design and build are optimized for the longest life and the lowest cost to the customer.